Hi to anyone who may be sticking with me here! Been a busy few weeks. Seems like its always feast or famine with my writing clients – everyone needing something at once leaves little time for blogging. But, hey someone’s gotta help pay to keep the lights on around here.
Anyway, found this great photography resource while working on my experimental site Online Degree Discussion. more…
After four straight days of shoveling, chopping and otherwise hacking at the snow and ice in our driveway, my hands, wrists and arms complained terribly every time I tried to do any crocheting. So what if it was the week before Christmas and Mom’s hat wasn’t done. So, what else is new? Mom getting something half-done for Christmas is pretty much routine around here.
I did finish her hat yesterday and hopefully will have pictures tomorrow. For a teaser, here’s a link to what I used to base my pattern on – Crochet Ridged Hat.
I was also trying to come up with a simple stuffed crochet heart pattern for Valentine’s Day. I figured that I could spend a couple of hours and would have a pattern that I could actually post on The Crafty Tipster. Well that was the plan anyway. My last pattern for a pinecone was really cool but I kept changing it every time I made one and never actually got around to posting anything. Hopefully, one day soon the pine cone will be unveiled.
The heart didn’t come out like I had planned. It just didn’t look right. 
. Yeah, I know you can see the white stuffing. It is only a prototype. I would definitely use some cheap red acrylic yarn to stuff a final piece.
My poor little heart seemed a bit too pointy to me and was definitely not something worthy of sharing with the world – at least not yet.
But, while trying to figure out where I was going wrong, I realized – hey those make cute little legs.
I love making little critters and things and thought my failed heart was turning into a cute Amigurumi something.
As you can see my little oops doesn’t have a face yet. And I’m thinking of adding a bit of hair. But overall, I think it’s kinda cute for a boo-boo. (The green yarn is there to mark the “front” side.)
I figure if it weren’t for those projects that go wrong somewhere that the world would be missing out on so many great works of art and inventions.
After all, Post-It notes are made with a failed glue and who would want a glue that doesn’t stick?
A bit of creative thinking took that failed glue and gave us Post-Its. Not that I’m comparing the genius of those little notepads we all know and love to my little crochet critter but both take a perceived failure and turn it into something useful.
So, what great cleverness has come from one of your oops projects? Care to share?
Every Christmas I look for something unique and handmade to make my mom for Christmas. She has a standing order for crochet hats, but I look for something special that she doesn’t know about.
I recently found a miniatures website while looking for additions for Crafty Tips and came across this great idea for a miniature evergreen tree on Annies Minis.
Annie used to sell her little Christmas trees but kindly offered instructions once she discontinued them from her inventory. She took dried caspia, dabbed it in a bit of glue and inserted it into florist’s foam to create a natural and realistic evergreen tree. Ah, perfect for my special hand made Christmas present for mom.
So off to the craft store. Annie’s instructions mentioned taking as much as two bundles to make a single tree. Eeek, at $4.99 a bundle it seemed a bit steep to make the single little tree I had in mind. So, I purchased one bundle and a bundle of dried green flowers that looked like a single baby’s breath flower on a long stem which was a little less at $3.99.
I did like most of us do and started making my Christmas tree from memory only to realize that the original instructions created an evergreen tree about 9 inches tall – way too tall for Mom’s village.
Also, every time I tried to squeeze my man-sized fingers in between the branches there was this tell-tale cracking noise as pieces of the branches below snapped off. Not good and bound to get only worse as I worked my way up the tree.
So, I put my failed Christmas tree with only one layer of caspia aside and started on a much smaller one using just the flowers.
This is a project that takes more than a bit of patience and a gentle touch but one that comes out oh-so-pretty.
I would also suggest since there are so many nice looking and cheap store-bought Christmas village trees available that this project be reserved for someone who will appreciate the effort and like a tree made from natural materials.
Working with the flowers was fussy. Just separating the stems from each other took as much or more time than the actual tree building. When I finally thought to put the bunch I was working with into a tall drinking glass it became much easier and quicker.
Major lessons learned from working with these flowers:
1. If the stem is broken or bent too close to the flower bud, don’t even bother trying to use it. (I did however save some of the prettier flowers to glue on the finished tree to shape it better and make it look a little more polished.)
2. Break each stem at a point about 1/2 to 1/3 inch or less, otherwise it will most likely break.
3. Having a longish nails, particularly on the thumb and index finger make it easier to grasp the flowers for insertion into the foam.
4. Work from the bottom up but while working on the bottom rows be mindful to not poke through the bottom of the foam if you want to have it stand up straight.
5. If you forget #4, a wire cutter works great to trim the protruding stems even with the base.
6. If your tree will be used on a tabletop display, you might want to glue a piece of felt to the bottom. (Mom’s village is covered in fiber fill “snow” so the bottoms of my trees won’t show.)
7. The flowers are stronger than they look but there will be some loss to clumsy hands, leaving the stems too long and pushing too hard into the foam. If the flower head breaks off, it’s usually easier to just leave the stem in the foam than risk damaging the flowers around it trying to pull it back out.
8. I used a butcher knife (first time using one of those in the craft room LOL) to cut the floral foam. This step is very messy and the foam bits that you shave off become electrified and stick to every darn thing it touches. I tried to cut mine directly into a garbage bag.
Ah, but now that I had abandoned the caspia, I figured there had to be something I could do with it. And I also had a fairly impressive pile of grassy-looking flower stems that went from the color of straw to dark green. Bushes and dried grasses!
Only problem is to make it look how I envisioned would require some crystal-like glitter to make them look like a snow covered bank. Crochet doesn’t typically require glitter so there’s none to be found in my stash. Oh well, Mom’s just going to have to imagine what it will look like with glitter. The weekend snow has us trapped in our driveway. Three days of shoveling and we still don’t have much more than a path.
Anyway, I think my flower bushes and trees came out so cute and the grassy/bush part will be way cool when the glitter/snow is added – probably next spring by the time we get out – freezing rain is now predicted for Christmas Eve.
Whatcha think? Are they way cool or what? Thanks Annie for a great idea to build upon!
p.s. Don’t anyone tell Mom what she’s getting for Christmas!
Rubber stamping, scrapbooking and paper crafts have always intrigued me but my oh-so-limited drawing skills have made a little easier to “just say no” to all the pretty papers, inks, embossing powders and stamps. After all, I already have enough beads, yarn and fabric to stock a small store. The idea of starting a new craft that requires a whole new set of supplies would be a bit foolhardy on my part considering my current financial situation. I do find these paper crafts fascinating and admire the folks who can make beautiful cards and other works of art.
While looking for some new rubber stamping sites to add to Crafty Tips, I discovered a great way for rubber stampers, scrapbookers and paper artists to share their creations and challenge themselves to be even more creative – weekly challenge sites.
The weekly challenges are a clever way some rubber stamping companies and other artists are promoting the art of rubber stamping. These challenge sites have a weekly theme, pattern or must use image and then the artists are challenged to come up with something wonderful following that week’s rules. The results are absolutely amazing! Many of the creations are then posted on the original site and a prize is awarded to a favorite design or via a random draw.
In the Rubber Stamping category I have added a new section called Rubber Stamping Challenges. There’s three great sites listed there now and I plan on adding more in the weeks to come.
Whether you are a rubber stamping god or goddess or are someone who simply admires those who are, be sure to check out these great sites and be inspired by all of the creativity on display.
Why is it that it’s always the seemingly simple projects that turn into an exercise in patience and more money than you ever thought possible? After all, I’ve made a few articles of clothing, quilted and done a myriad of other sewing projects; how hard could two little plain curtains be?
So, off we went to the nearest fabric store. They had some nice fabrics but nothing that jumped out and said THIS ONE! We have a number of small quilt shops in the area but I wanted a bigger selection and perhaps a bit cheaper price.
Recent Comments